News

Artificial Grass A Wear Resistance, Anti-aging



Artificial grass: a natural grass-like synthetic fiber by mechanical preparation fixed on the base fabric, for a variety of sports venues of the ground material. Widely used in sports and leisure venues.

Sports artificial grass: the use of modern professional machinery and equipment, synthetic fiber and other chemical materials processing and synthesis of a wear resistance, anti-aging to meet the needs of professional sports facilities, and can replace the natural grass movement of a chemical products.

Usually used for football, tennis, hockey, runway and other venues.

Leisure artificial grass: with modern professional machinery and equipment will be synthetic fiber and other chemical materials processing and synthesis of a high simulation, high environmental protection, long life and other characteristics, to meet the needs of leisure decoration of a chemical products. Usually used for building roofs, interior styling, courtyard landscapes, shopping arcades and playgrounds ...

Artificial turf grass fiber material. Polyethylene (PE), cost-effective, internationally popular, widely accepted by the public; Polypropylene (PP), grass fiber hard, easy to fiber generally applicable to tennis courts artificial turf, playground and other purposes; nylon (PA) Is a very good artificial grass material, the United States and other developed countries generally use nylon artificial grass, higher prices in China, most customers can not accept.

bottom. Wool composite woven cloth, durable, good anti-corrosion properties, the glue and grass have a good adhesion, easy to solid, this artificial grass price is moderate; grid fiber bottom, the use of glass fiber and other materials, to increase the bottom of the strength and Grass fiber binding force has a better help.

Artificial turf glue. SBR is a popular material for artificial turf in the Chinese market. Polyurethane (PU) glue, strength and restraint force is more than several times the above products, durable, beautiful color, never the same time, the price is cheap, with water, but easy to leak glue to Germany BASF better; Will be corrosive, moldy and environmentally friendly but the price is more expensive international common materials.

According to the structure of artificial grass to determine the type of classification, according to the grass structure, artificial grass is divided into: monofilament artificial grass, this product is mature domestic technology, economical and practical; curly grass, is pure imports, higher prices; straight song Mixed with lawn, is the market sports performance is good, the price is higher; single fiber type, is the international market of the main products, high simulation, the most durable, is the only maintenance and renovation of the product, and the emerging Chinese market olive simulation Type also has a natural grass of the context, on behalf of the Chinese market a high level of products.

Place the bottom of the seams at the bottom of the seams and raise the width of the grass on each side by about 50 cm. Then spread the 25 cm wide strip along the center of the turf seam and apply the special glue to the grass The bottom and the connection belt, turf seam coating with brush brush, brush plastic width of 6 cm. The strap is evenly coated with a squeegee on the connecting belt. In order to achieve the best bonding effect, use the glue before the full mixing or reverse the packaging barrel several times, so that even mixing glue. Brushing in the same direction when the glue, which will drive out the air and improve the uniformity of the coating, enhance the adhesive force. Drying: glue and other natural evaporation of the glue, after the glue must be dry for some time, until the solvent volatile clean, so that the adhesive layer sticky or produce bubbles, affecting the quality of bonding. Dry time should not be too long, so as not to lose glue sticky, resulting in degumming. To be adhesive layer was dry film (about 5-25 minutes) / 25 ℃ can be bonded. Adhesive: Bonding on both sides of the turf should be a one-time alignment of the adhesive tape (if the stitching found before the gap at the greater gap, from the gap at 2-5cm horizontal position, along the longitudinal direction of the gap cut, Interface to stretch to ensure that the appearance of beautiful), and the need to press the real, so that the bonding part of the close, do not move back and forth, so as not to affect the bonding effect. If the turf or connection with a wet phenomenon, you need to dry half an angel dry.